Fortex is a powerful, highly concentrated pH 14 alkaline cleaner developed for removing traffic film, grease and road grime from the bodywork of cars and work vehicles.
Apply Fortex either with a pressure sprayer sprayer or foam gun so as to create a firm layer of product on the surface.
Used in the correct dilution it is safe on aluminum, chrome, glass, plastics and rubber.
Note: spray gun not present.
Product does not contain NTA.
Make sure the bodywork is cool and not exposed to the sun.
1. Depending on the degree of soiling, you can dilute Fortex with water in a ratio of 1:10 to 1:100.
- 1:5 to 1:10 for cleaning rims
- 1:15 to 1:30 for heavily soiled bodywork/maintenance rim wash
- 1:30 to 1:50 medium soiled surfaces
- 1:50 to 1:100 for light soiling
- Dilution in Foam Gun: 1:3 to 1:7 depending on the severity of dirt
2. Spray generously or foam spray Fortex from the bottom up and let it work for at least 1 minute in spray and 3 to 10 minutes in foam gun depending on temperatures (cold temperatures allow longer application times with proper safety margins). For longer application times than indicated, make sure the product does not start to dry out.
3. Rinse with pressure washer and in case of heavy contamination from persistent smog coating, especially on white commercial vehicles, use a washing glove previously soaked in water to mechanically remove the smog residue before rinsing.
| Customised product to order | No |
|---|
