Fortex is a powerful, highly concentrated pH 14 alkaline cleaner developed for removing traffic film, grease and road grime from the bodywork of cars and work vehicles.
Apply Fortex either with a pressure sprayer sprayer or foam gun so as to create a firm layer of product on the surface.
Used in the correct dilution it is safe on aluminum, chrome, glass, plastics and rubber.
Fortex is part of Colorline, the line dedicated to professionals.
The product does not contain NTA.
Instructions for use:
We recommend testing the product in a hidden area before using it to prevent possible damage.
Do not use in direct sunlight and do not allow to dry on the surface.
1. Depending on the degree of soiling, you can dilute Fortex with water in a ratio of 1:10 to 1:100.
- 1:5 to 1:10 for cleaning rims
- 1:15 to 1:30 for heavily soiled bodywork/maintenance rim wash
- 1:30 to 1:50 medium soiled surfaces
- From 1:50 to 1:100 cleaning of protected vehicles
2. Spray generously or foammare Fortex from the bottom up and leave it on for at least 1 minute in order to obtain maximum cleaning power. For longer application times make sure that high ambient temperatures do not promote drying of the product.
3. Rinse with high-pressure cleaner and in case of heavy contamination by persistent smog coating, especially on white vehicles, use a washing glove previously soaked in water to mechanically remove the smog residue before rinsing.
| Customised product to order | No |
|---|
